Powering Microcontrollers

Does NASA use Arduino?

As far as public sources show, NASA's major spacecraft don't run on Arduino. Here's where Arduino does appear in space projects, and why flight hardware differs.

On this page
  1. What runs NASA’s spacecraft instead
  2. Where Arduino does show up in space projects
  3. Why Arduino isn’t used for flight-critical hardware
  4. How Arduino fits into space prototyping
  5. How to check a claim about a NASA project

As far as public sources show, NASA doesn’t use Arduino boards as the computers on its major spacecraft. Arduino does appear in space-related work, such as student projects, high-altitude balloon payloads, and small satellites built by universities and hobby groups. The sources we checked don’t name a specific NASA mission that flies an Arduino board. Treat any claim about a named NASA project as unconfirmed until you check that project’s own documentation.

What runs NASA’s spacecraft instead

Major NASA spacecraft use radiation-hardened processors, which are designed to keep working when cosmic rays and other high-energy particles disturb their circuits. Spacecraft also face extreme temperature swings and the vacuum of space. Commercial development boards such as the Arduino weren’t designed for those conditions.

Where Arduino does show up in space projects

  • CubeSats and small satellites. Some CubeSat projects have used Arduino-compatible boards for auxiliary systems, such as experiment controllers or sensor interfaces. These are usually student or university teams, not NASA’s flagship missions.
  • ArduSat. A 2013 satellite project that let Arduino users upload their own experiments to orbit. It was not a NASA mission.
  • High-altitude balloons. Hobbyists and students often fly Arduino-based sensors on balloons, which record temperature, pressure, and GPS position as they climb.

Why Arduino isn’t used for flight-critical hardware

Flight hardware has to meet requirements that development boards don’t. The main reasons are:

  • Radiation. Outside the atmosphere, high-energy particles can flip bits or damage chips. Space-qualified processors are built and tested to tolerate this.
  • Temperature. A spacecraft can swing between very hot and very cold depending on whether it’s in sunlight. Development boards aren’t tested for that range.
  • Vacuum. Without air, heat has to leave through conduction and radiation. Materials also must not release gases in vacuum, which can contaminate sensitive equipment.
  • Qualification and testing. Flight hardware goes through documented testing and reviews, and its parts must be traceable. A hobby board doesn’t come with that paperwork.

The same reasoning answers the question “Why is Arduino not used in industry?” for many products. A company may prototype on an Arduino, then ship a custom board with a microcontroller of similar architecture, along with the qualification testing the product needs.

How Arduino fits into space prototyping

Engineers and students often start with an Arduino to test a sensor or control idea on the bench. It’s quick to check a sensor’s output or a control loop before committing to parts that must be qualified. Once the idea works, the flight version usually moves to hardware built for the environment.

How to check a claim about a NASA project

  • Look for the mission’s official documentation, a NASA press release, or a university project page that names the board.
  • Check whether the claim names an Arduino board or only says “microcontroller.”
  • Be careful with the label “NASA-related.” An educational challenge or an outreach activity doesn’t mean NASA used a particular board in flight hardware.

For battery-powered projects, the board’s own current draw matters as much as the sensors. The how much current an Arduino Uno uses guide covers typical figures and how to measure them.

The complete guide to powering microcontrollers

How to Power an Arduino With a Power Supply (Plus a Soft Power Switch)
Read the guide

Keep exploring

Guides from other topics

All topics →