Start here · Essential guide
Electronic Components Explained: Active vs Passive
Learn how active and passive electronic components differ, with common examples of each, why real parts blur the line, and where to keep reading.
Components and Circuit Basics
Resistors, diodes, transistors, relays and inductors, plus how to read schematic symbols and labels.
Start here · Essential guide
Learn how active and passive electronic components differ, with common examples of each, why real parts blur the line, and where to keep reading.
Yes, an inductor passes steady DC, limited mainly by its winding resistance. Learn what happens when DC is switched on and off, and why it can overheat.
Learn the four common types of electrical diagram and how to read resistor, capacitor, inductor and solenoid symbols, including ANSI vs IEC styles.
Learn how a relay's coil, armature and contacts switch a load, what NO, NC, SPDT and DPDT mean, and how to drive a relay from a microcontroller.
Use R = (Vs - Vf) / I to size an LED current-limiting resistor. See a worked 5 V example, how to round to a standard value, and how to check power ratings.
Test an NPN or PNP transistor with a multimeter's diode mode: find the base, check both junctions, spot shorts or opens, and read the results.
A power MOSFET is a MOSFET built for higher current and voltage. Learn what stays the same, what changes in the ratings, and how to choose the right one.
Compare power transistors (BJTs) and MOSFETs for switching: how each is controlled, where energy is lost, and which one suits your switching load.
Read 4-band and 5-band resistor color codes step by step, with a color chart, worked examples, and tips for checking your reading with a meter.
Decode common schematic labels: GND and other ground labels, VCC, VDD and VSS on chips, NO/NC on switches and relays, and what the letter N can mean.
Diodes come in many kinds, so there is no single fixed count. Learn the main types, what each does, and how to choose one for a beginner project.
Resistors limit current, capacitors store charge in an electric field, and inductors store energy in a magnetic field. See plain definitions and units.
A solenoid is a coil that pulls or pushes a movable core when powered. Learn how it works, where you find solenoids, and how to drive one safely.
Related topics