Components and Schematics

Types of Diodes and What Each One Does

Diodes come in many kinds, so there is no single fixed count. Learn the main types, what each does, and how to choose one for a beginner project.

On this page
  1. Is there one official number of diode types?
  2. Rectifier and general-purpose diodes
  3. Zener diodes
  4. Schottky diodes
  5. Signal and switching diodes
  6. LEDs, photodiodes, and laser diodes
  7. Protection diodes: avalanche and TVS
  8. Varactor, tunnel, and Gunn diodes
  9. Reading a diode
  10. Choosing a diode for a project

Is there one official number of diode types?

No. Electronics guides group diodes differently. Some list about eight common types, and others list more than twenty specialist ones. The categories also overlap, so one diode can fit more than one description. A Zener diode, for example, can also be used for protection. It is more useful to learn the groups and what each one is for than to memorize a count.

Rectifier and general-purpose diodes

A rectifier diode passes current in one direction and blocks it in the other, which makes it useful for converting AC to DC. The 1N4007 is a common general-purpose silicon rectifier, rated for about 1 A and a reverse voltage of 1000 V. It is slower than the small-signal types described below, so it suits low-frequency and mains-frequency work better than fast switching.

Zener diodes

A Zener diode is designed to operate in reverse breakdown. In that region its voltage stays close to a rated value over a range of currents, so it can provide a reference voltage or limit a voltage. A simple Zener regulator pairs the Zener with a series resistor.

Schottky diodes

A Schottky diode has a lower forward voltage drop than a silicon diode, and it switches quickly. A silicon diode drops about 0.6 to 0.7 V when it conducts, while many Schottky types drop noticeably less at moderate currents. That lower drop wastes less energy, which is why Schottky diodes appear often in power supplies.

Signal and switching diodes

Small-signal diodes, such as the 1N4148, handle small currents and switch quickly. They are common in logic circuits and for input protection. The main difference from a power diode is the current rating and speed. Power diodes handle larger currents, and signal diodes are built for fast, small-current work.

LEDs, photodiodes, and laser diodes

  • Light-emitting diodes (LEDs) emit light when current flows in the forward direction. They need a series resistor or a constant-current driver, as covered in how to calculate an LED current-limiting resistor.
  • Photodiodes produce a current that depends on the light falling on them.
  • Laser diodes emit focused, coherent light.

Protection diodes: avalanche and TVS

Avalanche diodes and transient voltage suppressor (TVS) diodes are built to absorb voltage spikes. They start to conduct when the voltage goes above a set level, which limits how high the spike can rise. TVS diodes are designed for short surges, and designers often use them to protect inputs from voltage transients.

Varactor, tunnel, and Gunn diodes

A varactor (also called a varicap) diode acts as a voltage-controlled capacitor, and it appears in tuning circuits. Tunnel and Gunn diodes are used in high-frequency and microwave circuits. Beginner projects rarely need them.

Reading a diode

  • A diode has two terminals, an anode and a cathode.
  • Most diode packages mark the cathode with a stripe or band. For LEDs, the cathode is usually the shorter lead, and the flat edge of the lens often sits on the cathode side.
  • A bridge rectifier is a single package containing four diodes, so it has four leads.

Choosing a diode for a project

  • Check the reverse voltage rating. It should be comfortably above the highest reverse voltage in the circuit.
  • Check the forward current rating, with some margin above the current you expect.
  • For fast switching or small signals, a 1N4148 is a common starting point. For a flyback diode across a small DC relay coil, a 1N4007 or 1N4148 is a common choice.

How a relay works explains why relay coils need a flyback diode. For the broader classification question, see the active vs passive components pillar.

The complete guide to components and schematics

Electronic Components Explained: Active vs Passive
Read the guide

Keep exploring

Guides from other topics

All topics →