Yes. A transformer works by mutual induction. An AC voltage on the primary coil creates a changing magnetic field in an iron core. That field passes through the secondary coil and induces an AC voltage in it. The two coils share a magnetic path, not a direct electrical connection, in a standard two-winding transformer.
How induction works in a transformer
- The AC supply drives current through the primary winding.
- That current sets up a magnetic flux in the core. Because the current keeps changing direction, the flux keeps changing too.
- The changing flux passes through the secondary winding.
- By Faraday’s law of induction, a changing magnetic flux induces a voltage in any coil linked to it. That voltage appears across the secondary terminals.
The core is usually made of thin laminations of silicon steel. It concentrates the flux and guides it to the secondary coil. The laminations cut down the eddy currents that would otherwise heat the core.
Why the transformer needs AC
Induction needs a changing magnetic field. A steady DC current produces a steady field, and that induces no continuing voltage in the secondary. The only induced voltage from DC is a brief surge when the current is switched on or off. That is why a standard transformer needs AC to work.
How the voltage changes
For an ideal transformer with no losses:
V_secondary ÷ V_primary = N_secondary ÷ N_primary
The voltage ratio follows the turns ratio. A transformer with 100 turns on the primary and 10 on the secondary steps the voltage down by a factor of ten. Power in is roughly power out, so the lower-voltage side can supply more current. Real transformers have losses, and their output voltage drops a little under load.
Safety note
Transformers connected to mains voltage can be lethal. Do not open or rewire a mains transformer unless you are trained to do so. For hobby projects, use a commercial low-voltage supply that is designed and labelled for your use.
Where induction fits in a motor
A transformer is a static device with no moving parts. A motor converts electrical energy into rotation. Some AC motors use induction to turn their rotor, but that is a different arrangement. For an overview of motor types, see types of electric motors.