Electric Motors

Do brushless motors have more torque?

Brushless motors often give more torque for their size, but not always. Here's why, when brushed motors keep up, and what sets torque in practice.

On this page
  1. What torque is
  2. Why brushless motors often give more torque for their size
  3. When a brushed motor can match or beat it
  4. What limits torque in a real build
  5. Torque and KV
  6. Practical checks

Often, yes, for the same size and weight. A brushless motor usually gives more torque per unit of size, and it can sustain that torque for longer. It has no brush friction and no sparking at a commutator. But it is not automatic. The motor’s size, its magnets, the controller and the battery all decide what it can actually deliver.

What torque is

Torque is a turning force. In a motor, torque depends mainly on the magnetic field and the current in the windings. The torque constant, K_t, links the two:

Torque = K_t × current

In SI units, K_t is in newton-metres per amp (N·m/A).

Why brushless motors often give more torque for their size

  • No brush friction: brushed motors lose some power to brush friction and sparking. Brushless motors avoid those losses, so more of the input becomes useful torque.
  • Heat leaves more easily: in many brushless designs the windings sit on the stator, which is easier to cool than a spinning rotor. That lets the motor carry more current for longer.
  • Strong magnets: modern brushless motors often use rare-earth magnets, which give a strong field in a small volume.
  • Electronic control: the controller can manage current closely, so the motor can run near its limit without relying on brushes.

These are general trends. A poorly designed brushless motor can still be weaker than a good brushed one.

When a brushed motor can match or beat it

  • Low speed and stall: a brushed motor often gives strong, smooth torque at low speed without any controller. Some brushless setups feel less punchy at very low speeds, depending on the controller.
  • Size: a larger brushed motor can out-torque a smaller brushless motor. Size is often the deciding factor.
  • Simplicity: a brushed motor runs from a battery and a switch. A brushless motor needs an ESC or driver, and that controller can limit the output.

What limits torque in a real build

  • Current limit: the ESC or driver sets the maximum current, and the torque cannot rise above what that current allows.
  • Battery: a weak battery sags under high current, which lowers the voltage at the motor.
  • Motor heat: the motor can carry high current only for a limited time before it overheats.
  • Gearing: a gearbox trades speed for torque at the output. It does not add energy to the motor.

Torque and KV

For a given motor, a lower KV usually means more torque per amp, because the winding has more turns. A higher KV means more speed for the same voltage, with less torque per amp. In an ideal model, the two are linked by:

K_t (N·m/A) ≈ 9.55 ÷ KV

For example, a 1000KV motor has a K_t of about 0.0096 N·m/A in this model, and a 500KV motor has about 0.019 N·m/A. Real motors differ a little from the ideal figure, so use the maker’s data where it is published. For how KV and turns relate, see brushless motor KV vs turns.

Practical checks

  • Compare motors by their published torque, their rated current and their size, not by KV alone.
  • Check the peak torque and the continuous torque. A motor can deliver more torque for a short time than it can sustain.
  • Confirm that the ESC and battery can supply the current the motor needs at the torque you want.

For the motor types in general, see brushless DC motors explained.

The complete guide to electric motors

Types of Electric Motors: DC, Servo and Stepper Compared
Read the guide

Keep exploring

Guides from other topics

All topics →