Circuit Theory

Is LR circuit in JEE Mains?

Is LR circuit in JEE Mains? LR circuits fall under the alternating current area of JEE Main physics. This guide explains what they are and how to study them.

On this page
  1. Short answer
  2. What an LR circuit is
  3. Worked example: switching on a DC source
  4. AC in an LR circuit
  5. What to study for JEE Main
  6. Next steps

Short answer

Yes. LR circuits fall under the alternating current area of JEE Main physics. The AC topic covers LCR series circuits, reactance, impedance and power in AC circuits. An LR circuit is the same setup with the capacitor left out, so the same ideas apply. Syllabus wording can change from year to year, so check the current official syllabus from NTA, the body that conducts JEE Main, before you plan your study.

What an LR circuit is

An LR circuit has a resistor (R) and an inductor (L) connected to a source. An inductor opposes changes in current. It stores energy in its magnetic field and resists a sudden rise or fall in current.

Three quantities describe it:

  • Time constant: τ = L / R, in seconds when L is in henries and R is in ohms.
  • Inductive reactance (AC): XL = 2πfL, in ohms, where f is the frequency in hertz.
  • Impedance (AC): Z = √(R² + XL²), in ohms.

Worked example: switching on a DC source

Take a 12 V source, a resistor of R = 4 Ω, and an inductor of L = 2 H, connected in series at t = 0.

  • Final current: I = V / R = 12 V / 4 Ω = 3 A.
  • Time constant: τ = L / R = 2 H / 4 Ω = 0.5 s.
  • Current over time: i(t) = (V / R) × (1 − e^(−t/τ)).
  • At t = 0.5 s: i = 3 A × (1 − e⁻¹) = 3 A × 0.632 ≈ 1.90 A.

After about five time constants (2.5 s here), the current is within about 1% of its final value.

AC in an LR circuit

With an AC source at 50 Hz and L = 2 H, the inductive reactance is XL = 2π × 50 × 2 ≈ 628 Ω. That is far larger than R = 4 Ω, so the impedance is dominated by the inductor. The current is small, and it lags the voltage by a phase angle close to 90°.

What to study for JEE Main

  • Alternating current basics: peak and RMS values, phasors, reactance and impedance.
  • LCR series circuits: the general case that includes LR, with resonance.
  • Power in AC circuits: average power and the power factor.
  • Electromagnetic induction: the physics behind inductance.

Practise the time-constant calculation until it is quick, and draw phasor diagrams for impedance problems.

Next steps

The complete guide to circuit theory

Circuit Analysis Basics: Voltage, Current and Sources
Read the guide

Keep exploring

Guides from other topics

All topics →