Power Supplies

How to Read a Wall Adapter Label: Volts, Amps and Watts

Read a wall adapter label: AC input, DC output volts and amps, polarity, watts and certification marks. Includes a worked example and replacement tips.

On this page
  1. Short answer
  2. The input line
  3. The output line
  4. Watts
  5. The polarity symbol
  6. Plug size
  7. Safety and certification marks
  8. Worked example: matching a replacement
  9. Matching a replacement
  10. What the label does not tell you

Short answer

A wall adapter label tells you what the adapter takes from the wall and what it delivers to your device. The input figures describe the wall side. The output figures, DC volts and amps, describe what your device receives, so they are the ones to match.

The input line

A typical input line reads something like “INPUT: AC 100-240V 50/60Hz 1.5A”.

  • AC 100-240 V: the range of mains voltage the adapter accepts. This covers most mains supplies around the world. Check that your local mains falls inside the range.
  • 50/60 Hz: the mains frequencies it accepts. Most adapters work on either.
  • 1.5 A: the most current it draws from the wall. This is an input figure. It does not tell you what your device draws.

The output line

A typical output line reads something like “OUTPUT: DC 19V 3.42A”.

  • DC 19 V: the voltage the adapter delivers. It must match your device.
  • 3.42 A: the maximum current the adapter can supply. The device draws only the current it needs.

Watts

Power in watts is volts multiplied by amps. For the example above, 19 V × 3.42 A = 64.98 W, which is about 65 W. This is the most the adapter can deliver. A device that needs less is fine on a higher-watt adapter, as long as the voltage matches.

The polarity symbol

A small symbol shows the polarity of the output plug: a dot inside a circle, with plus and minus marks. The common arrangement is centre positive, which means the centre pin is positive and the outer sleeve is negative. Check it against the device’s input label. Reversed polarity can damage the device.

Plug size

The label rarely gives the plug size. Measure the barrel of the old plug if you can, including the outer diameter and the inner pin diameter. Common sizes include 5.5 mm by 2.1 mm and 5.5 mm by 2.5 mm, and some devices use smaller plugs. A plug that fits the socket is not proof of a match. Check the voltage, polarity and current as well.

Safety and certification marks

Certification marks show that an adapter has been tested to safety standards for a region. Common examples include:

  • UL or ETL for North America
  • CE for Europe
  • FCC for US radio emissions
  • PSE for Japan

Check the marks that apply where the adapter is sold and used. A missing or unreadable mark is a reason to avoid the adapter.

A double-square symbol means the adapter is double-insulated (Class II). It has no earth connection, and that is normal for that type.

Worked example: matching a replacement

Suppose your laptop’s label reads “DC IN 19V 3.42A”, and the original adapter reads “OUTPUT 19V 3.42A”.

  • The voltage matches (19 V).
  • The current matches (3.42 A), so a replacement with the same or a higher current rating is acceptable.
  • Check that the polarity symbol matches the device’s input.
  • Check the plug size, and the certification marks for your country.

If the replacement’s voltage were 20 V instead of 19 V, it would not match, even though it looks similar.

Matching a replacement

  • Output voltage: an exact match.
  • Output current: equal to or higher than the device’s rating.
  • Polarity and plug size: matching.
  • Watts: at least the device’s rated figure.
  • Certification: marks for your country.

Avoid unlabelled adapters and adapters with a different output voltage. The higher voltage adapter guide explains why voltage must match and when a higher current rating is fine.

What the label does not tell you

The label does not tell you how well an adapter is built, or whether it will hold up after years of heat. A reputable brand with the right marks and ratings is the safer choice. For the connector side, see what a DC outlet is.

The complete guide to power supplies

DC Power Supplies Explained: Linear, Switching and Variable
Read the guide

Keep exploring

Guides from other topics

All topics →