Short answer
A DC outlet is a socket or port that supplies direct current (DC), usually at low voltage. Examples include a 12 V car socket, the barrel jack on a laptop or router, and a USB port. A wall outlet supplies mains alternating current (AC). A DC outlet is a different kind of connector, and it must never be treated as a mains outlet.
DC and AC in brief
Direct current flows in one direction, from a battery or a power supply. Alternating current reverses direction many times a second, and the mains in a wall socket is AC. The two need different equipment, and a device built for one usually cannot run safely from the other.
Common types of DC outlet
- 12 V accessory socket: the “cigarette lighter” style socket in vehicles. It is part of the vehicle’s wiring and is usually fused.
- Barrel jack (DC power jack): a round plug with a centre pin. It is common on laptops, routers and small electronics. Sizes vary from one device to the next.
- USB port (USB-A or USB-C): low-voltage DC for charging and small loads. USB-C can also negotiate higher voltages with compatible chargers.
- Powerpole-style connectors: used on higher-current 12 V and 24 V battery systems, such as solar and off-grid setups.
- Screw terminals and banana jacks: found on bench supplies and in workshops.
Voltage and current ratings
Check the ratings printed on the socket, on the device, or in the manual. A socket has a voltage and a current rating, and the connected load must stay within the lower of the two. A device’s DC input label shows the voltage it needs and the maximum current it draws. Do not run a device from a socket that is rated below the device’s needs.
Polarity
Many barrel jacks are centre-positive: the centre pin is positive and the outer sleeve is negative. Some devices are centre-negative. The polarity symbol on the label shows which. Connecting the wrong polarity can damage the device.
Plug size alone does not tell you the polarity. A plug can fit the socket and still be wired the wrong way round. The guide to reading a wall adapter label explains the polarity symbol.
Where you will find DC outlets
- Vehicles, RVs and boats, where DC outlets power chargers, coolers, fans, lights and pumps from a 12 V or 24 V battery.
- Portable electronics, which are charged or powered through barrel jacks and USB ports.
- Off-grid and solar setups, where DC loads can run directly from a battery bank, avoiding the conversion losses of an inverter.
Safety
- Do not plug a mains-powered device or adapter into a DC outlet that is not rated for it.
- Do not connect a DC outlet to mains wiring. The two are different systems.
- Check the rating before connecting a high-current load. Undersized wiring or connectors can overheat.
- In vehicle and battery systems, fit a fuse close to the battery.
A helpful next step
If you are choosing a DC outlet for a project, match its voltage, current and connector type to the device, and label the polarity of each outlet clearly. For the DC side of an inverter setup, see is DC to AC a converter or inverter.