Short answer
In a power system, a switch is a device that opens or closes an electrical path. When it is open, no current flows through it. When it is closed, current flows, and the switch carries it. Switches let power be connected, disconnected or redirected, and some also protect equipment by interrupting current.
What a switch does
A switch in a power system has one or more of these jobs:
- Connecting and disconnecting a load or a source.
- Isolating part of a system so it can be worked on safely.
- Protecting equipment by interrupting current, as a circuit breaker does automatically.
- Transferring supply from one source to another, as a transfer switch does between the utility and a generator.
A switch’s ratings matter more than its shape. The ratings are covered below.
Switches in an electrical power system
“Power system” most often means the electrical network that generates, moves and delivers power, from generating stations to buildings. Common switches there include:
- Circuit breakers, which interrupt a circuit automatically when the current exceeds a safe level. They can be reset after the fault is cleared.
- Disconnectors (isolators), which open a circuit so that work can be done safely. They are operated only when no significant current is flowing, and are not designed to interrupt load current.
- Load-break switches, which can interrupt normal load current but are not designed to interrupt a fault current.
- Transfer switches, which move a building’s supply between the utility and a standby generator.
Switchgear of this kind is installed and maintained by qualified electricians or utility crews.
Switches in a building and in your devices
In a home or a hobby project, the switches you deal with are usually:
- A wall switch, which connects or disconnects a lighting or socket circuit.
- A mains switch on an appliance, a bench supply or a power supply.
- A DC switch in a battery or vehicle circuit. These are often rated differently from AC switches.
Switches inside power supplies
A power supply has two kinds of switch:
- The mains switch connects the mains to the unit. On many PC power supplies it is the rear switch, marked O (off) and I (on). Switching the unit off does not remove the charge in its capacitors, so unplug it before you work inside, and wait before touching anything.
- The internal switching transistor. In a switch-mode power supply, a fast transistor, usually a MOSFET, switches on and off many thousands of times a second. It controls how much energy reaches the output. This is what makes the supply a “switching” design. It is not something you operate by hand.
Ratings that matter
- Voltage rating: the highest voltage the switch can safely withstand.
- Current rating: the continuous current the contacts can carry.
- Breaking capacity: the fault current the switch can interrupt safely.
- AC versus DC: DC arcs are harder to extinguish than AC arcs, so a switch rated for AC is not necessarily rated for DC at the same voltage. Check the DC rating if you switch DC.
Safety
- Mains switches and switchgear can kill. Do not open, bypass or modify them.
- Do not fit a higher-rated fuse or breaker to stop a trip. The trip is telling you something is wrong.
- Keep water away from switches and mains connections.
- For work on a consumer unit or distribution panel, use a qualified electrician.
For the basics of how power supplies work, see DC power supplies explained. If a supply shows no output after you have checked its switches, the no output troubleshooting guide lists the next checks.