The short answer
Yes. In a parallel circuit, every branch is connected across the same two points, so every branch has the same voltage as the source. What divides between the branches is the current, or for capacitors, the charge.
Why every branch has the same voltage
A parallel branch starts and ends at the same two nodes as every other branch. Voltage is the difference in potential between two points, so if two branches share those two points, they must have the same voltage across them.
This is the reason parallel wiring is used for household outlets and for lamps that should each receive the full supply. If one lamp is switched off, the others still get the full voltage.
A simple example with a battery and two lamps
Connect a 9 V battery to two lamps in parallel. Each lamp sits directly across the battery, so each lamp has 9 V across it.
The current does not have to be the same in each lamp. A lamp that draws more current takes a bigger share of the total current from the battery. The voltage is shared, the current is not.
What does divide: current and charge
In a parallel circuit, the total current from the source splits between the branches. In a resistive branch, each branch’s current depends on its resistance (by Ohm’s law, I = V / R). A lower-resistance branch takes more current.
For capacitors connected in parallel, the same voltage appears across each one, but the charge divides. Each capacitor stores Q = C × V, so the larger capacitor stores more charge. The total capacitance is the sum of the individual values:
C_total = C1 + C2 + C3 + …
For example, 0.1 µF and 0.22 µF in parallel give 0.32 µF, and both see the same voltage. See capacitors and inductors in series and parallel for the full rules.
The series contrast
In a series circuit, the current is the same through every component, and the voltage divides between them. Series capacitors share charge and split the voltage, which is the opposite of the parallel case. For capacitors in series, the smallest value takes the largest share of the voltage.
Key takeaways
- In a parallel circuit, every branch has the same voltage as the source.
- Current (or, for capacitors, charge) is what divides between the branches.
- Parallel capacitors add their capacitance and share the same voltage.
- Series circuits do the opposite: current is shared, and voltage divides.
This assumes ideal wiring with negligible resistance. In real circuits, small voltage differences can appear along long or thin wires.